Server Options
The following commands can be used to control and manipulate the Loqate process or output. These are considered advanced functions, and we recommend that server options are used in custom workflows.
CASS2 releated server options added to the bottom of this list.
| Server Option | Description |
|---|---|
| AddressLineSeparator | Used to specify the string which will separate the output address lines within the output Address field (default <br>). |
| AutocompleteIndexOnly | This option allows the user to specify whether the search process should use Powersearch auto-complete index ONLY. The default is OFF. The option should be set to 0 or OFF to allow search tool to also use the parser and match tool when the auto-complete index cannot find any results. The option should be set to 1 or ON to allow the search tool to use the Powersearch auto-complete index files. This can also be used as a process option. |
| CasingIgnoreFields | Used to specify the fields that should be ignored by the OutputCasing option. System default is “ID,PostalCode,PostalCodePrimary,PostalCodeSecondary,ISO3166-2,ISO3166-3,PostBox,PostBoxNumber,PostBoxType,_L,Latitude,Longitude,GeoAccuracy,GeoDistance,AVC,AQI,HyphenClass,MatchedFieldList,DPS,CountryCode,Outputstatus,FormattedAddress”. Additionally, the following datasets also add AdministrativeArea to the default values: AUS, BRA, CAN, ITA, MEX, CHE, and USA. Currently system defaults cannot be overridden, but country-level values will be ignored when CasingIgnoreFields is used. Please re-use “AdministrativeArea” as a value to retain the default behavior. |
| CassCompanyName | This option is set within the loqate.ini file. This will allow the Loqate engine to print the Company Name value in the CASS and PS3553 reports. Please note, if a value has not been specified, then the default value will be ‘LOQATE’. |
| CassSoftwareName | This option is set within the loqate.ini file. This will allow the Loqate engine to print the CASS software name value in the CASS and PS3553 reports. Please note, if a value has not been specified, then the default value will be ‘LOQATE ENGINE’. |
| CassSoftwareVersion | This option is set within the loqate.ini file. This will allow the Loqate engine to print the CASS software version in the CASS and PS3553 reports. Please note, if a value has not been specified, then the default value will be ‘20.13.04.N’. |
| CertifiedCountryList | Used to specify a comma-delimited list of countries where data should be processed using the relevant certified process. e.g. “USA,CAN,AUS” to give CASS, SERP, and AMAS certified output respectively. |
| CombinedSearchMethods | Specifies whether or not to use a word-based search algorithm similar to a web search engine approach. Default Yes. |
| CombinedVerifyMethods | If this option is set to YES or ON or TRUE or 1, the word-based search algorithm similar to a web search engine approach will be enabled during verification process. Default Yes. |
| ConfidenceThreshold | Used to specify the threshold at which to stop returning parse interpretations, as a percentage of the confidence of the top result. Default 90. |
| ConfigurationFilename | Used to specify the name of the file that will attempt to be opened during the call to lqtServer::init. Default loqate.ini. |
| ContextResultCacheSize | Used to specify how many sets of context results should be cached in memory. This cache is a cost-based cache based on processing time, meaning that the slowest context analyses have their results cached. Default 0. Values up to around 5,000 are relevant, but the memory usage and performance gain will be dependent on the supplied input data. |
| ContextCountryCacheSize | Used to specify the number of MRU countries to generate ContextResult caches for. On an unsorted multi-country file a value of around 10 may be relevant, but the memory usage and performance gain will be dependent on the supplied input data. |
| CountryFields | Used to specify the comma delimited list of fields to be searched for country information. This should be a subset of the ParseFields entry. |
| CustomFields | Used to specify the comma delimited list of custom fields to be searched for during the parse process. |
| CustomFieldConfidence | Used to specify the confidence to be applied to the recognition of any fields recognized through the CustomFields option. |
| DataDirectory | Used to specify the directory in which to find the Global Knowledge Repository, if other than the directory of the loqate.ini configuration file specified during the lqtServer::init call. |
| DefaultCountry | Used to specify the ISO 3166-1 alpha-3 code which should be used if no identifiable country can be found in an input record. |
| DuplicateHandlingMask | Used to specify the duplicate handling level, between 0 and 15. Default is 0. When option is set, duplicate components in the input address are removed if it meets a certain criteria. For more details, please click this link. |
| EnhancedCountryTool | This option allows users to enable the Automatic Country Identification. To enable the option, set the value of the option to “ON” or “True”. To disable the option set the value to “OFF” or “False”. Default False. |
| FieldNameWeight | Used to specify the default field name weight, between 1 and 255. Default 10. A larger value will give more precedence to the supplied field name, a smaller value will give more precedence to the GKR matches. Individual field name weights can also be declared using the syntax ‘=|=’, etc. For instance ‘Organization=240|AdministrativeArea=100|50’ would mean a field name weight of 240 for the Organization field, 100 for the AdministrativeArea field, and a default of 50 for all remaining fields. |
| FieldStatus | This option produces a status code for every returned field. Default is “off”; to see this value, set the option to “on”. Examples include Verified, Identified, or Added. Statuses are defined here. |
| FlexiconCountryList | This option allows the user to specify a comma separated list of ISO 3166-1 alpha-3 country codes for which phonetic lexicons is enabled for parsing. Default value is empty which means that the phonetic lexicons are not enabled for any country by default. |
| ForceCountry | Used to specify the ISO 3166-1 alpha-3 code which should be used for all input records. |
| FormatFields | A list of default field formats for those fields that can be derived from a combination of other fields. This can be overridden on a per-country basis, and should only be changed if requested by Support staff. |
| GeocodeCountryList | Used to specify a comma-delimited list of ISO 3166-1 alpha-3 codes of acceptable countries to geocode. Input records from other countries will not return geocodes. The default is to process data from all countries. |
| GeocodeMatchRules | A list of default match rules specifying how fields can be combined when attempting to generate a geocode match. This can be overridden on a per-country basis, and should only be changed if requested by Support staff. |
| IgnoreUnmatched | Allow unmatched input data within the address lines to be ignored during a Search process, meaning that a search can proceed matching only partial input data. Default No. We don’t recommend you use this server option on a Verify process, as it may reduce the accuracy of otherwise valid results. |
| LogFileName | Used to specify a filename for debug output. Must be specified before the lqtServer::init call. |
| MatchScoreAbsoluteThreshold | Used to specify the minimum matchscore a record must reach in the Match process to be taken into account as a candidate for matching. Default value is 60 and the maximum value is 100. |
| MatchScoreThresholdFactor | This is a value that is used as a factor of the highest matching result. The resulting value is then used as a cut-off for considering candidates for the results. The higher the value of the factor, the higher the chance of getting a good verification result. Default value is 95 and the maximum value is 100. |
| MaximumGeoDistance | Used to specify the maximum GeoDistance a geocode can reach and still be returned as a result. Default is -1 (no limit). |
| MaximumInstanceCount | Used to specify the maximum number of lqtServer instances to allow to run concurrently. Default is -1 (no limit). If using the single threaded library it is recommended to set this to 1 to ensure that no attempt to open multiple lqtServer instances can occur. |
| MaxResults | Used to specify the maximum number of results to return in the ProcessResults structure. |
| MinimumGeoAccuracyLevel | Used to specify the minimum GeoAccuracy level a geocode must reach in order to be returned as a result. Default is 0 (zero), valid values are 0-5. |
| MinimumMatchscore | Used to specify the minimum matchscore a record must reach in order to avoid reversion. Default is 0 (zero), valid values are 0-100. |
| MinimumPostcode | Used to specify the minimum postcode status a record must reach in order to avoid reversion. Default is 0 (zero), valid values are 0-8. |
| MinimumSimilarity | .Used to specify the minimum similarity score that is needed to make a match to a candidate result. Default value is 70. |
| MinimumVerificationLevel | Used to specify the minimum verification level a record must reach in order to avoid reversion. Default is 0 (zero), valid values are 0-5. |
| NativeAddressLineReverse | Used to specify whether to reverse the order of the input address lines when processing non-Latin data. Usually this is set on a per-country basis automatically, but can be overridden by setting the server option as appropriate. When set to False, any input Address lines are concatenated for parsing in normal order (e.g. Address1 + Address2 + Address3), when set to True any input Address lines are concatenated for parsing in reverse order (e.g. Address3 + Address2 + Address1). |
| NewSearchPrefered | If this option is set to TRUE or ON, New Search is executed before the Old Search during execution of the Search Process. Typically if the input is nearly complete, New Search is preferred to complete the search and the option should be set to TRUE or ON. If the input is quite partial and is not nearly a complete address, Old Search is preferred and the option should be set to FALSE or OFF. Default option is FALSE or OFF. |
| OutputAddressFormat | Used to specify whether to output an extra field for the Address block fields with the suffix ‘Format’ showing how the hierarchical field positioning has occurred. Valid options are ‘Yes’ or ‘No’, default ‘No’. |
| OutputCasing | Used to specify the letter case to use for output fields. Valid options are ‘Upper’, ‘Title’, or ‘Lower’. The default will be Default: ‘Title’; unless the postal authority prefer a different case. For example, the postal authority in Spain prefer to have the Locality formatted in upper case. |
| OutputScript | Used to specify the ISO 15924 Code in which the output should be encoded, if possible. Alternatively ‘Native’ should be specified to choose the correct country specific script value. |
| OutputSortType | Used to specify the order in which the Search output results should be sorted. To sort in alphabetical order use ‘Alphabetical’, or alternatively specify ‘AVC’ to sort from the highest verification level to the lowest verification level. The option can also be set to ‘Similarity’ giving an indication of the percentage of the input characters that have been matched in the output. Default ‘AVC’. |
| ParseFields | Specifies the list of fields to be parsed into word tokens. |
| PreferPrimaryValidAlias | When option is set to “Yes”, the engine will pick out the first valid alias it finds within the reference data. Default value is “No”. |
| QueryResultCacheSize | Used to specify how many sets of query results should be cached in memory. This cache is a cost-based cache based on query time, meaning that the slowest queries have their results cached. Default 0. Values up to around 5,000 are relevant, but the memory usage and performance gain will be dependent on the supplied input data. |
| RangeDecompose | Used to specify how to expand ranges such as premise numbers and sub building numbers. Valid values are ‘Match’ (returning only the value matching the input query), ‘Range’ (returning a human-readable range, e.g. ‘1-9 Odd’), or ‘Full’ (expanding out the range into its constituent numbers, e.g. ‘1’, ‘2’, ‘3’, ‘4’, ‘5’). |
| ReferenceDatasetCacheSize | Used to specify the number of MRU reference datasets to cache. Default value is 5. |
| ReferencePageCacheSize | Used to specify the number of MRU pages to cache from each individual reference dataset. Default value is 12, each page equates to approximately 5Mb of memory use. |
| ReturnDataType | Valid values are Complete (default) or Verified. If set to Verified, the output from a Search process will only include data that has been verified against the available reference data. |
| ReturnVerifiedFieldsOnly | This option will return only verified fields, meaning that it will remove anything that isn’t verified from any field. SuppressUnmatched option will only suppress the unverified components in the Address field. Default No, meaning all fields will be returned. This can be specified on a per-country basis, with the added ability to specify fields to ignore during the check, using the following syntax ReturnVerifiedFieldsOnly=[:;;…;][,:;…;,…,]. e.g. ReturnVerifiedFieldsOnly=BE:SubBuilding;Premise,DE:SubBuilding;Premise,AT:SubBuilding;Premise or ReturnVerifiedFieldsOnly=US,CA,GB. The former will return verified fields only in Belgium, Germany, and Austria, but will retain non-verified data in the Premise and SubBuilding fields, the latter will return verified fields only in USA, Canada, UK. |
| SearchAutocompleteIndexCheck | Specifies whether or not to use the ‘autocomplete index’ algorithm integral to Address Powersearch (this will not function if Address Powersearch is not installed). This algorithm returns a list of suggestions in record time for entries like ‘4916 eas’ in the US. For more information on Address Powersearch, please visit https://support.loqate.com/technology/search/. Related to this option is the AutocompleteIndexOnly option which will prevent other algorithms from being called. Because the autocomplete index algorithm is much faster than the other algorithms, this guarantees a faster response time in all situations. Default Yes. |
| SearchLikeFieldCheck | Specifies whether or not to use the ‘like field’ algorithm. This option looks for an exact field match in the address field which is useful for single items like postcodes, building names, organization names, etc. Default Yes. |
| SearchMatchRules | A list of default match rules specifying how fields can be combined when attempting to generate a search. This can be overridden on a per-country basis, and should only be changed if requested by Support staff. |
| SearchReferenceTypes | Specifies the list of lexicon tagged field types that should be searched for in the reference data during a parse process. This should only be changed if requested by Support staff. |
| SimpleParse | Specifies whether or not to use the ‘simple parse’ algorithm. This option looks for something like premise + street in the address field, but is not particularly tolerant of invalid input data. Default Yes. |
| StrictReferenceMatch | This option helps to output results that are identical to what is found within the reference data. For example, if an input address has a premise of “08”, but the reference data contains “8”, the Premise would be verified with an Premise Number output of ”08”. Turning on StrictReferenceMatch would have the output be “8”. Default No. |
| StrictRefMatchCountryList | This is a list of ISO2 countries that you would like to have the option StrictReferenceMatch turned on for. |
| SuppressAdditionFields | Used to specify the comma-delimited list of fields that should not be added to an output result if they do not appear in the input record. |
| SuppressAddressFields | Used to specify the comma-delimited list of fields that should be suppressed from the Address field output. |
| SuppressFields | Used to specify the comma-delimited list of fields that should be suppressed from the output. |
| SuppressMatchFields | Used to specify the comma-delimited list of fields that should be suppressed when determining the Address Verification Code. |
| SuppressUnmatched | If this option is set to TRUE or ON, unverified fields will not be output in Address fields (Address, Address1, Address2, etc.). Default option is FALSE or OFF. |
| TextFields | Specifies the list of field names, and the order in which they should be combined, to generate the combined word list for parsing. This should be a subset of the ParseFields entry. |
| TransliterationIgnoreFields | Used to specify the fields that should not be transliterated. Default “ID,ISO3166-2,ISO3166-3,_L,Latitude,Longitude,GeoAccuracy,GeoDistance,AVC”. |
| ToolInfo | Specify ‘Yes’ to output extra debug information viewable using the getFieldInfo method. |
| UseCustomLexicons | Specify ‘Yes’ to force the API to search for custom lexicons (lx__c.lfs files) |
| UseSymbolicTransliteration | Specify ‘No’ to limit transliteration to complete field phrase matches. Default Yes. |
| VerifyCountryList | Used to specify a comma-delimited list of ISO 3166-1 alpha-3 codes of acceptable countries to process. Input records from other countries will return the unprocessed Address Verification Code ‘U00-U00-P0-000’. The default is to process data from all countries. |
| VerifyMatchRules | A list of default match rules specifying how fields can be combined when attempting to generate a verification match. This can be overridden on a per-country basis, and should only be changed if requested by Support staff. |
| Process Options | |
| LogInput | Record the process input data to the specified debug log file. |
| LogOutput | Record the process output data to the specified debug log file. |
| CASS2 related Server options | |
| CassAvcEnable | Yes|No (Default: No) The default will Z00-00-00-000 (AVC) and Z (AQI), but computing the report values can be forced. Please note that if returned, these fields may not accurately reflect the changes made in the record during the CASS process. |
| CassUrbFirst | Yes|No (Default: No) This specifies the Urbanization location on the address lines output (Puerto Rico only). The default will put the value after the address lines(s) with premise, thoroughfare, and sub-building. |
| CassZipFields | Yes|No (Default: No) Populate “Finance” and “AutoZoneIndicator”. If these fields are desired, customers will experience a moderate performance degradation (up to 20%). |
| CassCityAbbreviation | Yes|No (Default: No) If a Locality name is longer than 13 characters, this option can be used to return the official, short version. Both short and long versions are valid according to CASS. |
| CassFalsePosDir | ’path_to_use’ Allows you to control the directory where the False Positive file is created. For example: CassFalsePosDir=’C:\temp’ or CassFalsePosDir=’/opt/temp’. |
| CassUseUSPSPreferredCity | Yes|No (Default: No)
Setting this to Yes will return the USPS preferred city name. This server option only applies to on-premises installations and only applies to the session and can not be turned on and off for individual address records. |
| SERP related Server options | |
| SerpWesternStyle | Yes|No (Default: No)
When Yes, the output Address/Delivery address lines will have the SubBuilding first, followed by a hyphen, the Premise, and remainder of the address. For example: Input: APT 200 – 6200 MCKAY AVE, BURNABY BC V5H 4L7 CAN Output: Option ‘No’ or blank: 6200 MCKAY AVE APT 200, BURNABY BC V5H 4L7 Option ‘Yes’: 200-6200 MCKAY AVE, BURNABY BC V5H 4L7 This option only impacts addresses that are SerpStatusEx of ‘V’ (valid) or ‘C’ (correctable) |